Dell C9000 series, Reference Manual

Page: 1558 / 2286

Row Heading Description
LSR-Q The queue, for transmission or reception, for the link state
request packets.
Other-Q The queue, for transmission or reception, for the link state
acknowledgement, database description, and update packets.
The following describes the error definitions for the
show ip ospf statistics
process-id global
command.
Error Type Description
Intf_Down Received packets on an interface that is either down or OSPF is
not enabled.
Non-Dr Received packets with a destination address of ALL_DRS even
though SELF is not a designated router.
Self-Org Receive the self originated packet.
Wrong_Len The received packet length is different to what was indicated in
the OSPF header.
Invld-Nbr LSA, LSR, LSU, and DDB are received from a peer which is not a
neighbor peer.
Nbr-State LSA, LSR, and LSU are received from a neighbor with stats less
than the loading state.
Auth-Error Simple authentication error.
MD5-Error MD5 error
Cksum-Err Checksum Error
Version Version mismatch
AreaMismatch Area mismatch
Conf-Issue The received hello packet has a different hello or dead interval
than the configuration.
No-Buffer Buffer allocation failure.
Seq-no A sequence no errors occurred during the database exchange
process.
Socket Socket Read/Write operation error.
Q-overflow Packets dropped due to queue overflow.
Unknown-Pkt Received packet is not an OSPF packet.
RtidZero Received router-ID (0.0.0.0) from peer.
Example
ell#show ip ospf 1 statistics
Interface TenGigabitEthernet 0/0
Error packets (Receive statistics)
Intf-Down 0 Non-Dr 0 Self-
Org 0
Wrong-Len 0 Invld-Nbr 0 Nbr-
Open Shortest Path First (OSPFv2 and OSPFv3) 1558