Dell C9000 series, Reference Manual

Page: 201 / 2286

boot system
Specify the location where the Dell Networking OS image used to boot the system is stored.
C9000 Series
Syntax
boot system [gateway ip address | [rpm0 {default | primary |
secondary [ ftp: | system:{ A :| B: } | tftp: ] }] [rpm1 {default |
primary | secondary [ ftp: |system:{ A :| B: } | tftp: ]}]
Parameters
gateway Enter the IP address of the default next-hop gateway for the
management subnet.
ip-address Enter an IP address in dotted decimal format.
rpm0 Enter the keyword
rpm0
to specify the route processor module
0.
rpm1 Enter the keyword
rpm1
to specify the route processor module
1.
default Enter the keyword
default
to use the default Dell Networking
OS image.
primary Enter the keyword
primary
to use the primary Dell Networking
OS image.
secondary Enter the keyword
secondary
to use the secondary Dell
Networking OS image.
ftp: Enter the keyword
FTP:
to retrieve the image from an FTP
server: ftp:// userid : password @ host-ip / filepath .
system A: | B: Enter
A:
or
B:
to boot one of the flash system partitions.
tftp: Enter the keyword
TFTP:
to retrieve the image from a TFTP
server: tftp:// host-ip / filepath .
Defaults Not configured.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
File Management 201