Dell C9000 series, Reference Manual

Page: 1586 / 2286

Version Description
8.3.19.0 Introduced on the S4820T.
Usage Information In general, the path cost is calculated as:
10^8 / bandwidth
Using this formula, the default path cost is calculated as:
• 10-Gigabit Ethernet—Default cost is 1
• 40-Gigabit Ethernet — Default cost is 1
ipv6 ospf dead-interval
Set the time interval since the last hello-packet was received from a router. After the time interval elapses, the
neighboring routers declare the router down.
C9000 Series
Syntax
ipv6 ospf dead-interval seconds
To return to the default time interval, use the
no ipv6 ospf dead-interval
command.
Parameters
seconds
Enter the time interval in seconds. The range is from 1 to 65535
seconds.
Defaults 40 seconds (Ethernet).
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
7.8.1.0 Added support for C-Series.
7.4.1.0 Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1586