Dell C9000 series, Reference Manual

Page: 1563 / 2286

tag tag-value (OPTIONAL) Enter the keyword
tag
then a value to match on
routes redistributed through a route map. The range is from 0 to
4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Usage Information The
area range
command summarizes routes for the different areas.
With the
not-advertise
parameter configured, you can use this command to filter
out some external routes. For example, if you want to redistribute static routes to OSPF,
but you don't want OSPF to advertise routes with prefix 1.1.0.0, you can configure the
summary-address 1.1.0.0 255.255.0.0 not-advertise to filter out all the routes fall in
range 1.1.0.0/16.
Related
Commands area range — summarizes routes within an area.
timers spf
Set the time interval between when the switch receives a topology change and starts a shortest path first
(SPF) calculation.
C9000 Series
Syntax
timers spf delay holdtime
Open Shortest Path First (OSPFv2 and OSPFv3) 1563