Dell C9000 series, Reference Manual

Page: 2075 / 2286

Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information When you decrease the buffer size, all messages stored in the buffer are lost. Increasing
the buffer size does not affect messages stored in the buffer.
Related
Commands
clear logging — clears the logging buffer.
default logging buffered — returns the logging buffered parameters to the default
setting.
show logging — displays the logging setting and system messages in the internal buffer.
logging console
Specify which messages are logged to the console.
C9000 Series
Syntax
logging console [ level ]
To return to the default values, use the
default logging console
command.
To disable logging to the console, use the
no logging console
command.
Parameters
level (OPTIONAL) Indicate a value from 0 to 7 or enter one of the
following parameters:
emergencies
,
alerts
,
critical
,
errors
,
warnings
,
notifications
,
informational
, or
debugging
. The default is 7 or debugging .
Defaults level = 7 ; size = debugging
Command Modes CONFIGURATION
Simple Network Management Protocol (SNMP) and Syslog 2075