Dell C9000 series, Reference Manual

Page: 1751 / 2286

Usage Information The
on-disable transmit shutdown
command allows transmission of LLDP
shutdown frames when the LLDP protocol is disabled in the interface mode.
Example
Dell#sh running-config interface tengigabitethernet 0/1
!
interface TenGigabitEthernet 10/1
no ip address
switchport
switchport mode private-vlan host
!
protocol lldp
on-disable transmit shutdown
no shutdown
Related
Commands
show running-config lldp — displays the LLDP running configuration.
power budget global-threshold
Set a global threshold limit for the PoE power budget on a specified port extender.
C9000 Series
Syntax
power budget global-threshold pe pe-id stack-unit unit number
threshold-value
Parameters
pe pe-id Enter the keyword
pe
and port extender ID. Range is from 0 to
255.
stack-unit unit
number
Enter the keyword
stack-unit
and unit number. Range is from
0 to 7.
threshold-value
Enter the power threshold limit value in percentage. Range is
from 10 to 99%. Default value is 99%.
Default None
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Port Extenders (PE) 1751