Dell C9000 series, Reference Manual

Page: 1808 / 2286

Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Added support for the
ipv6
and
ip-any
options on the Z9500.
9.5(0.0) Added support for the
ipv6
and
ip-any
options on the Z9000,
S6000, S4820T, S4810, MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added the keyword
multicast
. Added support for the
DSCP
marking
option for the S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.5.1.0 Added support for the
DSCP Marking
option.
6.1.1.1 Introduced on the E-Series.
Usage Information To access this command, enter the
class-map
command. After the class map is
identified, you can configure the match criteria.
The
match ip precedence
command and the
match ip dscp
command are
mutually exclusive.
Up to eight precedence values can be matched in one match statement. For example,
to indicate the IP precedence values 0 1 2 3, enter either the
match ip precedence
0-3
or
match ip precedence 0,1,2,3
command.
NOTE: Only one of the IP precedence values must be a successful match
criterion, not all of the specified IP precedence values must match.
Related
Commands
class-map — identifies the class map.
Quality of Service (QoS) 1808