Dell C9000 series, Reference Manual

Page: 2208 / 2286

Version Description
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S8420T.
8.3.12.0 Introduced on the S4810.
Usage Information To delay the system from bringing up the VLT port for a brief period to allow IGMP
Snooping and Layer 3 routing protocols to converge, use the
delay-restore
parameter. Use this feature:
• after a VLT device is reloaded.
• after the time when active VLTi link failed and restored.
Related
Commands show vlt statistics — displays statistics on VLT operations.
lacp ungroup member-independent
Enables bare metal provisioning (BMP) booting of a top of rack (ToR) device through VLT nodes
C9000 Series
Syntax
lacp ungroup member-independent {vlt | port-channel}
Parameters
port-channel Force all LACP port-channel members to become switchports.
vlt Force all VLT LACP members to become switchports.
Defaults Not configured.
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
9.0.2.0 Introduced on the S6000.
Virtual Link Trunking (VLT) 2208