Dell C9000 series, Reference Manual

Page: 1444 / 2286

Version Description
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000
switches.
ipv6 neighbor
Configure a static entry in the IPv6 neighbor discovery.
C9000 Series
Syntax
ipv6 neighbor{ ipv6-address } {interface interface }
{ hardware_address }[vrf vrf-name ]
To remove a static IPv6 entry from the IPv6 neighbor discovery, use the
no ipv6
neighbor ipv6–address {interface interface
Parameters
ipv6-address Enter the IPv6 address of the neighbor in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal
fields of zero.
interface
intehardware_rfac
e
Enter the keyword
interface
then the interface type and slot/
port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port/subport
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a Loopback interface, enter the keyword
loopback
then a number from 0 to 16383.
• For a port channel interface, enter the keywords
port-
channel
then a number.
• For a Null interface, enter the keyword null then the Null
interface number.
• For a VLAN interface, enter the keyword
vlan
then a
number from 1 to 4094.
• For a tunnel interface, enter the keyword
tunnel
then the
tunnel interface number. The range is from 1 to 16383.
• For a port extender Gigabit Ethernet interface, enter the
keyword
peGigE
then the pe-id / stack-unit / port-id
information. The pe-id range is from 0 to 255; the stack-
Neighbor Discovery Protocol (NDP) 1444