Dell C9000 series, Reference Manual

Page: 1806 / 2286

Parameters
ip Enter the keyword
ip
to support IPv4 traffic.
ipv6 Enter the keyword
ipv6
to support IPv6 traffic.
ip-any Enter the keyword
ip-any
to support IPv4 and IPv6 traffic.
dscp-list Enter the IP DSCP values that is to be the match criteria.
Separate values by commas — no spaces ( 1,2,3 ) or indicate a
list of values separated by a hyphen (1-3). The range is from 0 to
63.
set-ip-dscp value (OPTIONAL) Enter the keywords
set-ip-dscp
then the IP
DSCP value. The matched traffic is marked with the DSCP value.
The range is from 0 to 63.
set-color value (Optional) Enter the keyword set-color followed by a color
value. Traffic that fulfills the match criteria is marked with the
color value that you specify. The default value is yellow.
Defaults none
Command Modes CLASS-MAP CONFIGURATION (config-class-map)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Added the
ipv6
and
ip-any
options on the Z9500.
9.5(0.0) Added the
ipv6
and
ip-any
options on the Z9000, S6000,
S4820T, S4810, MXL.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added the keyword
multicast
. Added the
DSCP Marking
option support on the S-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series. Added support for the
DSCP
Marking
option.
6.2.1.1 Introduced on the E-Series.
Quality of Service (QoS) 1806