Dell C9000 series, Reference Manual

Page: 1728 / 2286

PE MAC: f8:b1:56:00:01:04
Interface Errors:
TenGigabitEthernet 1/16 - Error State
Dell#show pe 9
Codes: A - Active, I - Inactive
Reason: CTM - Card Type Mismatch, CAM - CAM ACL Mismatch
SVM - Software Version Mismatch, UE - Unknown Error
Offline Reason: UNP - Unit Not Present,
ICE - IPC CP Error, IRE - IPC RP Error
ISE - IPC Setup Error, CVE - Card Validation Error
PE-ID assigned: 9
Status: online
System Mac: f8:b1:56:00:01:28
PE Up Time: 08:36:56
PE Discovery Status: Provisioned PE
User Configured Cascade Ports: Te 1/9(A),Te 1/16(I)
Cascade LAG: Po 267(Up)
----------------------------------------------------------------------
Stack-id Status Reason Type UnitMac No. of Ports
---------------------------------------------------------------------
0 online - C1048P f8:b1:56:00:02:24 52
1 online - C1048P f8:b1:56:00:01:28 52
2 online - C1048P f8:b1:56:00:01:90 52
3 online - C1048P 00:00:ab:00:00:2c 52
Dual Homing
Use the commands in the following section to setup the configurations on a port extender connected in a
dual-homing environment.
commit
Use
commit
to apply the common configurations made in the Configuration Terminal Batch mode.
C9000 Series
Syntax
commit
Default None
Command Modes CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Port Extenders (PE) 1728