Dell C9000 series, Reference Manual

Page: 2150 / 2286

time-zone
Configure the time zone for contacting the person.
Syntax
time-zone zone +-HH:MM [start-time HH:MM ] [end-time HH:MM ]
To remove the time zone, use the
no time-zone [zone | start-time | end-
time]
command.
Parameters
zone +-HH:MM Enter the keyword
zone
then a time difference from GMT
expressed as HH:MM. This number may be preceded by either a
+ or – sign.
start-time HH:MM Enter the keywords
start-time
then a starting time expressed
as HH:MM. Use the 24-hour clock format.
stop-time HH:MM Enter the keywords
stop-time
then a stopping time expressed
as HH:MM. Use the 24-hour clock format.
Command Modes SUPPORTASSIST PERSON
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Usage Information This command is optional for SupportAssist service configuration.
SupportAssist Server Commands
Dell Networking OS supports the following SupportAssist Server mode commands.
proxy-ip-address
Configure a proxy for reaching the SupportAssist remote server.
Syntax
proxy-ip-address { ipv4-address | ipv6-address } port port-number
[ username userid password [ encryption-type ] password ]
SupportAssist 2150