Dell C9000 series, Reference Manual

Page: 1241 / 2286

ipv4pbr number
Enter
ipv4pbr
and the FP block number for IPv4 PBR ACL. The
FP block number range is 0 to 6.
iscsioptacl
number
Enter
iscsioptacl
and the FP block number for ISCSI
optimization ACL. The FP block number range is 0 to 6.
openflow number
Enter
openflow
and the FP block number for OpenFlow ACL.
The FP block number range is 0 to 6.
vrfv4acl number
Enter
vrfv4acl
and the FP block number for VRF ACL. The FP
block number range is 0 to 6.
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.2(0.0) Added support for the
fcoe
parameter on the S4810 and
S4820T.
9.1.(0.0) Added support for OpenFlow on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Added the keywords
fcoeacl
and
iscsioptacl
on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Added the keywords
ecfmacl
,
vman-qos
, and
vman-dual-
qos
.
8.2.1.0 Introduced on the S-Series.
7.8.1.0 Introduced on the C-Series.
Usage Information For the new settings to take effect, save the new CAM settings to the startup-config
(
write-mem
or
copy run start
) then reload the system.
IPv6 Access Control Lists (IPv6 ACLs) 1241