Dell C9000 series, Reference Manual

Page: 1951 / 2286

Version Description
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information To view the defined user names, use the
show running-config user
command.
Related
Commands
• password — specifies a password for users on terminal lines.
• enable sha256-password — configures SHA-256 based password.
• show running-config — views the current configuration.
RADIUS Commands
The following RADIUS commands are supported by Dell Networking OS.
debug radius
View RADIUS transactions to assist with troubleshooting.
C9000 Series
Syntax
debug radius
To disable debugging of RADIUS, use the
no debug radius
command.
Defaults Disabled.
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
Security 1951