Dell C9000 series, Reference Manual

Page: 1523 / 2286

route-map map-
name
(OPTIONAL) Enter the keywords
route-map
then the name of
the route map.
tag tag-value (OPTIONAL) Enter the keyword
tag
to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
Defaults Not configured.
Command Modes ROUTER OSPF
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Added support for Multi-Process OSPF.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
router-id
To configure a fixed router ID, use this command.
C9000 Series
Syntax
router-id ip-address
To remove the fixed router ID, use the
no router-id ip-address
command.
Parameters
ip-address Enter the router ID in the IP address format.
Defaults none.
Command Modes ROUTER OSPF
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
Open Shortest Path First (OSPFv2 and OSPFv3) 1523