Dell C9000 series, Reference Manual

Page: 1443 / 2286

Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, and Z9000
switches.
hop-limit
Enable the verification of the advertised hop count limit. If this command is not configured, the verification
process is bypassed.
C9000 Series
Syntax
hop-limit {maximum | minimum limit }
To reset the hop count limit, use the
no hop-limit {maximum | minimum limit }
command.
Parameters
maximum limit Enter the keyword
maximum
then the hop limit value. The range
is from 0 to 254.
minimum limit Enter the keyword
minimum
then the hop limit value. The range
is from 0 to 254.
Defaults none
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
Neighbor Discovery Protocol (NDP) 1443