Dell C9000 series, Reference Manual

Page: 1816 / 2286

qos-policy-input
Create a QoS input policy on the router.
C9000 Series
Syntax
qos-policy-input qos-policy-name [layer2] [cpu-qos]
To remove an existing input QoS policy from the router, use the
no qos-policy-
input qos-policy-name [layer2] [cpu-qos]
command.
Parameters
qos-policy-name Enter the name for the policy map in character format (32
characters maximum).
layer2 (OPTIONAL) Enter the keyword
layer2
to specify a Layer 2
Class Map. The default is Layer 3 .
cpu-qos Enter the keyword
cpu-qos
to create a QoS input policy to be
used to rate-limit control-plane traffic (CoPP).
Defaults Layer 3
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Policy name character limit increased from 16 to 32.
7.6.1.0 Introduced on the C-Series and S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.1 Introduced on the E-Series.
Quality of Service (QoS) 1816