Dell C9000 series, Reference Manual

Page: 1206 / 2286

•
enable
— Takes the TCP/UDP source and destination
ports into consideration when doing hash computations.
This option is enabled by default.
ingress-port
enable Enter the keywords to distribute traffic based on the following:
•
enable
— Takes the source port into consideration when
doing hash computations. This option is disabled by
default.
Defaults IP 4-tuple (IP SA, IP DA, Source Port, Destination Port)
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.0 Added the
ingress-port
parameter for the S4810.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information By default, the system distributes incoming traffic based on a hash algorithm using the
following criteria:
• IP source address
• IP destination address
• TCP/UDP source port
• TCP/UDP destination port
Related
Commands hash-algorithm ecmp — changes the hash algorithm across an ECMP.
IPv4 Routing 1206