Dell C9000 series, Reference Manual

Page: 1386 / 2286

layer2_priority Enter the Layer 2 priority (C-Series and E-Series only). The range
is from 0 to 7.
DSCP_value Enter the DSCP value (C-Series and E-Series only). The range is
from 0 to 63.
priority-tagged
number
Enter the keywords
priority-tagged
then the Layer 2 priority.
The range is from 0 to 7.
Defaults unconfigured.
Command Modes CONFIGURATION (conf-lldp)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series and E-Series.
Related
Commands
debug lldp interface — debugs LLDP.
show lldp neighbors — displays the LLDP neighbors.
show running-config lldp — displays the LLDP running configuration.
advertise med streaming-video
To advertise streaming video services for broadcast or multicast-based video, configure the system. This
command does not include video applications that rely on TCP buffering.
C9000 Series
Syntax
advertise med streaming-video { vlan-id layer2_priority DSCP_value }
| {priority-tagged number }
To return to the default, use the
no advertise med streaming-video { vlan-id
layer2_priority DSCP_value } | {priority-tagged number }
command.
Link Layer Discovery Protocol (LLDP) 1386