Dell C9000 series, Reference Manual

Page: 535 / 2286

NOTE: You can use this attribute to view information on
BGP peers in a peer group that correspond to either a
default or a non-default VRF.
ipv4 multicast (OPTIONAL) Enter the keyword
ipv4
followed by the keyword
multicast
to view information related only to ipv4 multicast
routes.
ipv4 unicast (OPTIONAL) Enter the keyword
ipv4
followed by the keyword
unicast
to view information related only to ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword
ipv6
followed by the keyword
unicast
to view information related only to ipv6 unicast routes.
peer-group-name (OPTIONAL) Enter the name of a peer group to view information
about that peer group only.
detail (OPTIONAL) Enter the keyword
detail
to view detailed status
information of the peers in that peer group.
summary (OPTIONAL) Enter the keyword
summary
to view status
information of the peers in that peer group. The output is the
same as that found in the
show ip bgp summary
command.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Added the ipv4 multicast and ipv6 unicast parameters.
Introduced on S6000–ON.
9.4.(0.0) Added support for VRF.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Added the
add-path
option to the S4810. Output on the S4810
shows the ADDPATH parameters.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
Border Gateway Protocol 535