Dell C9000 series, Reference Manual

Page: 662 / 2286

Parameters
cp-switch Enter the keyword
cp-switch
to clear counters for rate-limited
traffic on the central switch (aggregated CoPP).
all Enter the keyword
all
to clear counters for all protocol rate-
limiting traffic information.
pe pe-id Enter the keyword
pe
and the port extender ID. The PE ID range
is from 0 to 255.
stack-unit unit
number
Enter the keyword
stack-unit
and the stack unit number. The
stack-unit range is from 0 to 7.
portset port-pipe
ID
Enter the keyword
portset
and the port-pipe ID. The port-pipe
ID value is 0.
Defaults Clear per-protocol rate-limiting counters for all control-plane and port-set (port-pipe)
traffic.
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Usage Information To display the per-protocol counters of rate-limited control-plane traffic at the
aggregated (switch) or line card and port set level, use the
show control-traffic
protocol
command.
clear control-traffic queue
Clear per-queue counters of rate-limited control-plane traffic.
C9000 Series
Syntax
clear contol—traffic queue {all | queue-number } counters
Control Plane Policing (CoPP) 662