Dell C9000 series, Reference Manual

Page: 290 / 2286

host ip-address Enter the keyword
host
then the IP address to specify a host IP
address.
destination Enter the IP address of the network or host to which the packets
are sent.
count (OPTIONAL) Enter the keyword
count
to count packets that the
filter processes.
bytes (OPTIONAL) Enter the keyword
byte
to count bytes that the
filter processes.
dscp (OPTIONAL) Enter the keyword
dcsp
to match to the IP DSCP
values. The range is from 0 to 63.
order (OPTIONAL) Enter the keyword
order
to specify the QoS
priority for the ACL entry. The range is from 0 to 254 (where 0 is
the highest priority and 254 is the lowest; lower-order numbers
have a higher priority). If you do not use the keyword
order
, the
ACLs have the lowest order by default (255).
fragments Enter the keyword
fragments
to use ACLs to control packet
fragments.
log (OPTIONAL) Enter the keyword
log
to include ACL matches in
the log.
threshold-in msgs
count
(OPTIONAL) Enter the
threshold-in-msgs
keyword followed
by a value to indicate the maximum number of ACL logs that
can be generated, exceeding which the generation of ACL logs
is terminated with the
seq
,
permit
, or
deny
commands. The
threshold range is from 1 to 100.
interval minutes (OPTIONAL) Enter the keyword
interval
followed by the time
period in minutes at which ACL logs must be generated. The
threshold range is from 1 to 10 minutes.
monitor (OPTIONAL) Enter the keyword
monitor
when the rule is
describing the traffic that you want to monitor and the ACL in
which you are creating the rule is applied to the monitored
interface. For more information, refer to the “Flow-based
Monitoring” section in the Port Monitoring chapter of the
Dell
Networking OS Configuration Guide .
Defaults Not configured.
Command Modes CONFIGURATION-EXTENDED-ACCESS-LIST
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Access Control Lists (ACL) 290