Dell C9000 series, Reference Manual

Page: 1844 / 2286

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
DSCP Color Map Commands
The DSCP color map allows you to set the number of specific DSCP values to yellow or red. Traffic marked as
yellow delivers traffic to the egress queue which will either transmit the packet if it has available bandwidth or
drop the packet due to no ability to send. Traffic marked as red (high drop precedence) is dropped.
dscp
Sets the number of specific DSCP values for a color map profile to yellow or red.
C9000 Series
Syntax
dscp {yellow | red} [ list-dscp-values ]
To remove a color policy map profile, use the
no dscp {yellow | red} [ dscp-
list ]
command.
Parameters
Yellow Enter the
yellow
keyword. Traffic marked as yellow delivers
traffic to the egress queue which either transmits the packet if it
has available bandwidth or drops the packet due to no ability to
send.
red Enter the
red
keyword. Traffic marked as red is dropped.
dscp-list Enter a list of IP DSCP values. The dscp-list parameter specifies
the full list of IP DSCP value(s) for the specified color. Each
DSCP value in a list is separate values by commas – no spaces
(1,2,3) or indicates a list of values separated by a hyphen (1-3).
Range is
0
to
63
.
Defaults None
Command Modes CONFIG-COLOR-MAP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
Quality of Service (QoS) 1844