Dell C9000 series, Reference Manual

Page: 928 / 2286

interface Vlan 33
private-vlan mode isolated
no ip address
shutdown
Related
Commands show running-config — displays the current configuration.
duplex (Management)
Set the mode of the Management and Port Extender Gigabit Ethernet (PeGigE) interfaces.
C9000 Series
Syntax
duplex {half | full}
To return to the default setting, use the
no duplex
command.
Parameters
half Enter the keyword
half
to set the Management interface to
transmit only in one direction.
full Enter the keyword
full
to set the Management interface to
transmit in both directions.
Defaults Not configured.
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Documentation modified — added Management to distinguish
from
duplex (10/100 Interfaces)
.
Usage Information This command applies to the Management interface on the route processor modules
(RPMs) and port extender (PE) ports.
Interfaces 928