Dell C9000 series, Reference Manual

Page: 1752 / 2286

Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
Usage Information Configure a global threshold limit for the Power over Ethernet (PoE) power budget for a
specified port extender. A default power threshold value of 99% is configured when
there is no threshold value configured.
Use this command in Configuration Terminal Batch mode to configure the threshold
limit for the PoE power budget in a dual-homing setup.
Example
Dell(conf)#power budget global-threshold pe 1 stack-unit 0 99
Dell#show power detail pe 0 stack-unit 0
Unit Total System Redundancy Inline Inline Inline
Inline Inline
Power Power Power Power Power Power
Power Power
Available Consumed Consumed Threshold Available Allocated
Consumed Remaining
(Watts) (Watts) (Watts) (%) (Watts) (Watts)
(Watts) (Watts)
--------- ---------- --------- --------- --------- --------- ---------
--------------
0/0 1000 150 0 99 841 0
0 841
Related Command show power detail
power inline
Enable inline power and configure maximum power allocation with priority for the powered device
connected to an interface.
C9000 Series
Syntax
power inline {[ max_milliwatts ]| priority {critical | high | low}}
To disable a device that has been enabled for PoE power supply, use the
no power
inline
command.
Parameters
max_milliwatts (OPTIONAL) Specify the maximum amount of inline power
allocation to a powered device connected to the interface.
Range is 440–30000 milliwatts (mWs). The default value is
30000 mWs.
NOTE: The max_milliwatt configuration is effective only
in Static mode.
Port Extenders (PE) 1752