Dell C9000 series, Reference Manual

Page: 2061 / 2286

Related
Commands
show running-config snmp — displays the SNMP running configuration.
snmp-server packetsize
Set the largest SNMP packet size permitted. Wen the SNMP server is receiving a request or generating a reply,
use the
snmp-server packetsize global configuration
command.
C9000 Series
Syntax
snmp-server packetsize byte-count
Parameters
byte-count Enter one of the following values 8, 16, 24 or 32. Packet sizes
are 8000 bytes, 16000 bytes, 32000 bytes, and 64000 bytes.
Defaults 8
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
snmp-server trap-source
Configure a specific interface as the source for SNMP traffic.
C9000 Series
Syntax
snmp-server trap-source interface
Simple Network Management Protocol (SNMP) and Syslog 2061