Dell C9000 series, Reference Manual

Page: 148 / 2286

show processes ipc
Display the IPC messaging used internally between Dell Networking OS processes.
C9000 Series
Syntax
show processes ipc [recv-stats | send-stats] [cp | rp | lp | pe
{
slot-id | all}]
Parameters
recv-stats Enter the keyword
recv-stats
to display information on IPC
receiver-side messages.
send-stats Enter the keyword
send-stats
to display information on IPC
sender-side messages.
cp Enter the keyword
cp
to view IPC message statistics on the
Control Processor CPU.
rp Enter the keyword
rp
to view IPC message statistics on the
Route Processor CPU.
lp slot-id Enter the slot ID of the line card for which you want to view IPC
message statistics. The range of switch slot IDs is from 0 to 11.
Enter
linecard all
to view IPC statistics for all line cards.
pe pe-id Enter the keyword
pe
to view IPC message statistics on the port
extender (PE) .The PE ID range is from 0 to 255.
NOTE: The pe option is only visible when the extended
bridge feature is enabled.
Defaults Display IPC message statistics on all switch CPUs: Control Processor, Route Processor,
and line cards.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
Control and Monitoring 148