Dell C9000 series, Reference Manual

Page: 477 / 2286

Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.2.1.0 Introduced on the E-Series ExaScale.
7.4.1.0 Introduced
Usage Information If you configure the
set ipv6 next-hop
command in ROUTE-MAP mode, its
configuration takes precedence over the
neighbor next-hop-self
command.
neighbor password
Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors.
C9000 Series
Syntax
neighbor { ip-address | peer-group-name } password [ encryption-type ]
password
To delete a password, use the
no neighbor { ip-address | peer-group-name }
password
command.
Parameters
ip-address Enter the IP address of the router to be included in the peer
group.
peer-group-name Enter the name of a configured peer group.
encryption-type (OPTIONAL) Enter
7
as the encryption type for the password
entered.
7
means that the password is encrypted and hidden.
password
Enter a text string up to 80 characters long. The first character
of the password must be a letter.
You cannot use spaces in the password.
Defaults Not configured.
Command Modes ROUTER BGP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Border Gateway Protocol 477