Dell C9000 series, Reference Manual

Page: 1704 / 2286

•
fin
= finish (no more data from the user)
•
psh
= push function
•
rst
= reset the connection
•
syn
= synchronize sequence number
•
urg
= urgent field
operator (OPTIONAL) For TCP and UDP parameters only. Enter one of the
following logical operand:
•
eq
= equal to
•
neq
= not equal to
•
gt
= greater than
•
lt
= less than
•
range
= inclusive range of ports (you must specify two
ports for the
port
command parameter.)
Defaults none
Command Modes REDIRECT-LIST
Command History
Version Description
9.9(0.0) Introduced on the C9010.
9.8(0.0) Introduced on the S3048-ON and S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
8.4.2.1 Introduced on the C-Series and S-Series.
8.4.2.0 Introduced on the E-Series TeraScale.
7.7.1.0 Introduced on the E-Series ExaScale.
redirect
Configure a rule for the redirect list.
C9000 Series
Syntax
redirect { ip-address | slot/port } | tunnel tunnel-id }[track <obj-
id> ] { ip-protocol-number | protocol-type [ bit ]} { source mask | any
Policy-based Routing (PBR) 1704