Dell C9000 series, Reference Manual

Page: 288 / 2286

• For a VLAN interface, enter the keyword
vlan
then the
slot/port number.
• For a Port Channel interface, enter the keyword
port-
channel
then a port channel number.
• For a port extender Gigabit Ethernet interface, enter the
keyword
peGigE
then the pe-id / stack-unit / port-id
information. The pe-id range is from 0 to 255; the stack-
unit unit-number range is from 0 to 7; and the port-id
range is from 1 to 48.
in Enter the keyword
in
to display information for an ip ingress or
inbound access-list attached to an interface.
out Enter the keyword
out
to display information for an ip egress or
outbound access-list attached to an interface.
Defaults None
Command Modes EXEC
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
Usage Information If you do not attach an ingress or egress access-list to an interface, no information
displays and you return to the
DELL#
prompt.
Example
Dell# show ip access-lists out
Standard Egress IP access list first
seq 5 permit any count bytes (0 bytes)
seq 10 deny any count (0 packets)
Standard Egress IP access list five
seq 5 permit any
Standard Egress IP access list four
seq 5 permit any count bytes (0 bytes)
seq 10 deny any count (0 packets)
Standard Egress IP access list second
seq 5 permit host 1.1.1.1 count bytes (0 bytes)
Extended Egress IP access list ten
seq 5 permit tcp any eq 1 any
seq 10 deny ip any host 11.11.11.11 count (0 packets)
Access Control Lists (ACL) 288