Dell C9000 series, Reference Manual

Page: 2257 / 2286

clear counters vrrp ipv6
Clear the counters recorded for IPv6 VRRP groups.
C9000 Series
Syntax
clear counters vrrp ipv6 [ vrid | vrf instance ]
Parameters
vrid (OPTIONAL) Enter the number of an IPv6 VRRP group. The
range is from 1 to 255.
vrf instance (OPTIONAL) Enter the name of a VRF instance (32 characters
maximum) to clear the counters of all IPv6 VRRP groups in the
specified VRF.
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2.(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
8.4.1.0 Introduced on E-Series ExaScale, C-Series, and S-Series.
Support was added for IPv6 VRRP groups in non-default VRF
instances.
8.3.2.0 Introduced on the E-Series TeraScale.
debug vrrp ipv6
Enable debugging of VRRP.
C9000 Series
Syntax
debug vrrp ipv6 interface [ vrid ] {all | packets | state | timer}
Virtual Router Redundancy Protocol (VRRP) 2257