Setting the Date anD time
①
Turn dial to the
Date/Time
position.
②
YEAR:
Press
j
and
k
to change the year.
Press
i
to advance to
MONTH
.
③
MONTH:
Press
j
and
k
to change the
month. Press
i
to advance to
DAY
.
④
DAY
: Press
j
and
k
to change the date.
Press
i
to advance to
TIME
.
⑤
TIME
: Press
j
and
k
to select
AM
,
PM
or
24 HR.
Press
i
to select hours. Press
j
and
k
to change the hour shown on the
display. Press
i
to select minutes. Press
j
and
k
to change the minutes.
The date, day and time have now been set.
Setting Program Start time
NOTE:
A single watering start time
will start the program (A,B,C) and all
stations assigned to the program will
run sequentially.
①
Turn dial to the
Start Times
position.
②
Select program A, B or C by pressing
n
.
③
Press
j
and
k
to change the start time.
④
Press
i
to select the next start time,
or
n
for the next program.
To eliminate a programmed start time:
Press
j
and
k
to set the start time
to
OFF
(which is between 11:45 PM
and midnight).
Setting Station run timeS
(watering Duration)
①
Turn the dial to the
Run Times
position.
②
Select program A, B or C by pressing
n
.
③
The display will show the station number
and the program letter selected
(A, B or C). The run time will be flashing.
④
Press
j
and
k
to change the run time.
⑤
Press
i
to advance to the next station.
➏
Repeat steps 4 and 5 for each station.
Setting DayS to water
①
Turn the dial to the
Water Days
position.
②
The controller displays curr ently pro-
grammed active day schedule infor-
mation. This dial position provides four
different water day options: water on spe-
cific days of the week, interval watering,
or water on odd days or even days. Each
program can only operate using one type
of water day option.
Selecting SPecific DayS
of the week to water
①
With the arrow cursor on a specific day
(the cursor always starts with Monday),
press
j
to activate a particular day of the
week to water. Press
k
to cancel water-
ing for that day. After pressing a button
the cursor automatically advances to
the next day. A
V
indicates a water day.
A
W
icon indicates a no water day.
②
Repeat step 1 until desired days have
been selected.
Please refer to Owner’s Manual for
interval and odd or even day scheduling.
rain SenSor ByPaSS Switch
If a sensor is preventing system operation
(or no sensor is installed and the switch is
in the
ACTIVE
position),
SENSOR OFF
will
be displayed. Move the switch to
BYPASS
and the rain sensor will be bypassed.
SeaSonal aDjuStment
①
Turn dial to the
Seasonal Adjust
position.
②
Press
j
and
k
to change the seasonal
adjustment from 5% to 300% in 5%
increments. The station run times dis-
played will automatically be recalculated.
clearing controller’S
memory/reSetting controller
If you feel that you have mis-programmed
the controller, there is a process that will
reset the memory to factory defaults and
clear all data that has been entered into
the controller.
①
Hold down the
n
button.
②
While holding down the
n
button,
press and release the reset button on
the back of the front panel, wait until the
display reads 12:00 AM, then release the
n
button.
③
All the memory has been cleared and the
controller may be reprogrammed.
manually oPerating
a Single Station
①
Turn dial to the
Manual
position.
②
Station run time will flash in the display.
Press
i
to move to the desired station.
Press
j
and
k
to set the watering
duration.
③
Turn the dial to the
RUN
position to
run the station. (Station designated will
water, then controller will return to
automatic mode).
one touch manual Start
anD Station aDvance
With the dial in the
RUN
position, press
and hold
i
until
STATION 1
appears in
the display. Release the arrow button
to run all stations for their programmed
run time (one touch).
To adjust run times prior to running all
stations, press and hold the
i
until
STATION 1
appears and then press
j
and
k
to select the run time and
i
to advance
and adjust all programmed stations.
Pro-c
Controller Programming instruCtions:
