Dell C9000 series, Reference Manual

Page: 416 / 2286

bgp always-compare-med
Allows you to enable comparison of the MULTI_EXIT_DISC (MED) attributes in the paths from different
external ASs.
C9000 Series
Syntax
bgp always-compare-med
To disable comparison of MED, enter
no bgp always-compare-med
.
Defaults Disabled (that is, the software only compares MEDs from neighbors within the same
AS).
Command Modes ROUTER BGP
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced command.
7.7.1.0 Introduced on the C-Series.
Usage Information Any update without a MED attribute is the least preferred route.
If you enable this command, use the
clear ip bgp *
command to recompute the
best path.
Border Gateway Protocol 416