Dell C9000 series, Reference Manual

Page: 816 / 2286

Parameters
ipv6-address Enter the keyword
ipv6–address
through which the server
address can be reached.
Default Disabled.
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.7(0.0) Introduced on the S4810, S4820T, S6000, S6000–ON, Z9000,
and Z9500.
Usage Information Use this command on the interfaces where the DHCP clients are connected to forward
the packets from clients to DHCP server and vice-versa.
Example
Dell(conf-if-te-0/0)#ipv6 helper-address
X:X:X:X::X IPv6 helper address
lease
Specify a lease time for the addresses in a pool.
C9000 Series
Syntax
lease { days [ hours ] [ minutes ] | infinite}
Parameters
days Enter the number of days of the lease. The range is from 0 to 31.
hours Enter the number of hours of the lease. The range is from 0 to
23.
minutes Enter the number of minutes of the lease. The range is from 0 to
59.
infinite Specify that the lease never expires.
Defaults 24 hours
Command Modes DHCP <POOL>
Dynamic Host Configuration Protocol (DHCP) 816