Dell C9000 series, Reference Manual

Page: 952 / 2286

Layer 2
Overhead
Link MTU and IP MTU Delta
Untagged Packet
with VLAN-Stack
Header 22 bytes
Tagged Packet
with VLAN-Stack
Header 26 bytes
portmode hybrid
To accept both tagged and untagged frames, set a physical port or port-channel. A port configured this way
is identified as a hybrid port in report displays.
C9000 Series
Syntax
portmode hybrid
To return a port to accept either tagged or untagged frames (non-hybrid), use the
no
portmode hybrid
command.
Defaults non-hybrid
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information The following describes the
interface
command shown in the following example.
This example sets a port as hybrid, makes the port a tagged member of VLAN 20, and
Interfaces 952