Dell C9000 series, Reference Manual

Page: 899 / 2286

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Related
Commands
gvrp enable — enables GVRP on physical interfaces and LAGs.
protocol gvrp — access GVRP protocol.
garp timers
Set the intervals (in milliseconds) for sending GARP messages.
C9000 Series
Syntax
garp timers {join | leave | leave-all}
To return to the previous setting, use the
no garp timers {join | leave |
leave-all}
command.
Parameters
join Enter the keyword
join
then the number of milliseconds to
configure the join time. The range is from 100 to 147483647
milliseconds. The default is
200 milliseconds .
NOTE: Designate the milliseconds in multiples of 100.
leave Enter the keyword
leave
then the number of milliseconds to
configure the leave time. The range is from 100 to 2147483647
milliseconds. The default is
600 milliseconds .
NOTE: Designate the milliseconds in multiples of 100.
leave-all Enter the keywords
leave-all
then the number of
milliseconds to configure the leave-all time. The range is from
100 to 2147483647 milliseconds. The default is 1000
milliseconds.
NOTE: Designate the milliseconds in multiples of 100.
Defaults As above.
GARP VLAN Registration (GVRP) 899