Dell C9000 series, Reference Manual

Page: 1149 / 2286

Version Description
9.5(0.1) Introduced on the Z9500.
9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
Usage Information The last-member-query-interval is also the interval between successive Group-Specific
Query messages. The
ip igmp snooping last-member-query-interval
command allows you to change the last-member-query interval.
ip igmp snooping mrouter
Statically configure a VLAN member port as a multicast router interface.
C9000 Series
Syntax
ip igmp snooping mrouter interface interface
To delete a specific multicast router interface, use the
no igmp snooping mrouter
interface interface
command.
Parameters
interface interface Enter the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
• For a Port Channel interface, enter the keywords
port-
channel
then a number. For the C-Series and S-Series,
the range is from 1 to 128.
Defaults Not configured.
Command Modes
INTERFACE
Internet Group Management Protocol (IGMP) 1149