Dell C9000 series, Reference Manual

Page: 252 / 2286

dot1x port-control
Enable port control on an interface.
C9000 Series
Syntax
dot1x port-control {force-authorized | auto | force-unauthorized}
Parameters
force-authorized Enter the keywords
force-authorized
to forcibly authorize a
port.
auto Enter the keyword
auto
to authorize a port based on the 802.1X
operation result.
force-
unauthorized Enter the keywords
force-unauthorized
to forcibly
deauthorize a port.
Defaults none
Command Modes
INTERFACE
INTERFACE (BATCH MODE)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.10(0.0) Introduced the Configuration Terminal Batch mode on C9010.
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the C-Series and S-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information The authenticator completes authentication only when
port-control
is set to
auto
.
802.1X 252