Dell C9000 series, Reference Manual

Page: 69 / 2286

asf-mode
Enable the transmission of Alternate Store and Forward (ASF) packets as soon as a threshold is reached.
C9000 Series
Syntax
asf-mode linecard { slot-id | all}
To return to standard Store and Forward mode, use the
no asf-mode linecard
command.
Parameters
linecard slot-id Enter the slot ID of a switch line card. The range of slot IDs is
from 0 to 11. Enter
all
to enable ASF mode on all line cards on
the switch.
Defaults Not configured
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information You must save the configuration and reload the system to implement ASF. When you
enter the command, the system sends a message stating that the new mode is enabled
when the system reloads.
Control and Monitoring 69