Dell C9000 series, Reference Manual

Page: 2152 / 2286

enable
Enable communication with the SupportAssist server.
Syntax
enable
To disable communication to a specific SupportAssist server, use the
no enable
command.
Defaults Enabled
Command Modes SUPPORTASSIST SERVER
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
Version Description
9.10(0.0) Introduced on the C9010, Z9100–ON, S6100–ON, and S3100
series.
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON,
S5000, S6000, S6000–ON, Z9500, MXL.
Related
Commands
• server — configure the name of the remote SupportAssist server.
url
Configure the URL to reach the SupportAssist remote server.
Syntax
url uniform-resource-locator
To delete the URL for the server, use the
no url
command.
Parameters
uniform-
resource-locator Enter a text string for the URL using one of the following
formats:
• http://[username:password@]<hostip>:<portNum>/
<filepath>
• https://[username:password@]<hostip>:<portNum>/
<filepath>
NOTE: The host IP for the server may be specified
as an IPv4 address, an IPv6 address or as a DNS
hostname. If using the DNS hostname, the DNS
resolver will need to be configured and enabled.
SupportAssist 2152