Dell C9000 series, Reference Manual

Page: 355 / 2286

Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information Sequence numbers for this filter are automatically assigned starting at sequence
number 5.
If you do not use the
ge
or
le
options, only packets with an exact match to the prefix
are filtered.
Related
Commands
deny — configures a filter to drop packets.
seq — configures a drop or permit filter with a specified sequence number.
seq
To a deny or permit filter in a prefix list while configuring the filter, assign a sequence number.
C9000 Series
Syntax
seq sequence-number {deny | permit} {any} | [ ip-prefix / nn {ge
min-prefix-length } {le max-prefix-length }] | [bitmask number ]
To delete a specific filter, use the
no seq sequence-number {deny | permit}
{any} | [ ip-prefix {ge min-prefix-length } {le max-prefix-length }]
| [bitmask number ]
.
Parameters
sequence-
number Enter a number. The range is from 1 to 65534.
deny Enter the keyword
deny
to configure a filter to drop packets
meeting this condition..
Access Control Lists (ACL) 355