Dell C9000 series, Reference Manual

Page: 286 / 2286

log (OPTIONAL) Enter the keyword
log
to include ACL messages in
the log.
threshold-in msgs
count
(OPTIONAL) Enter the
threshold-in-msgs
keyword followed
by a value to indicate the maximum number of ACL logs that
can be generated, exceeding which the generation of ACL logs
is terminated with the
seq
,
permit
, or
deny
commands. The
threshold range is from 1 to 100.
interval minutes (OPTIONAL) Enter the keyword
interval
followed by the time
period in minutes at which ACL logs must be generated. The
threshold range is from 1 to 10 minutes.
monitor (OPTIONAL) Enter the keyword
monitor
when the rule is
describing the traffic that you want to monitor and the ACL in
which you are creating the rule is applied to the monitored
interface. For more information, refer to the “Flow-based
Monitoring” section in the Port Monitoring chapter of the
Dell
Networking OS Configuration Guide .
Defaults Not configured
Command Modes CONFIGURATION-STANDARD-ACCESS-LIST
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Add the DSCP value for ACL matching.
8.2.1.0 Allows ACL control of fragmented packets for IP (Layer 3) ACLs.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Added support for the non-contiguous mask and added the
monitor
option.
6.5.10 Expanded to include the optional QoS
order
priority for the
ACL entry.
Access Control Lists (ACL) 286