Dell C9000 series, Reference Manual

Page: 1319 / 2286

mac learning-limit station-move-violation
Specify the actions for a station move violation.
C9000 Series
Syntax
mac learning-limit station-move-violation {log | shutdown-both |
shutdown-offending | shutdown-original}
To disable a configuration, use the
no mac learning-limit station-move-
violation
command, then the configured keyword.
Parameters
log Enter the keyword
log
to generate a syslog message on a
station move violation.
shutdown-both Enter the keyword
shutdown
to shut down both the original
and offending interface and generate a syslog message.
shutdown-
offending Enter the keywords
shutdown-offending
to shut down the
offending interface and generate a syslog message.
shutdown-original Enter the keywords
shutdown-original
to shut down the
original interface and generate a syslog message.
Defaults none
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the S-Series.
7.8.1.0 Introduced on the C-Series.
7.5.1.0 Introduced on the E-Series.
Usage Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Layer 2 1319