Dell C9000 series, Reference Manual

Page: 1405 / 2286

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.1) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.1 Introduced on the S4810.
7.8.1.0 Added the
local
option.
7.7.1.0 Added the
rejected-sa
option.
6.2.1.1 Introduced
debug ip msdp
Turn on MSDP debugging.
C9000 Series
Syntax
debug ip msdp {event peer address | packet peer address | pim}
To turn debugging off, use the
no debug ip msdp {event peer address |
packet peer address | pim}
command.
Parameters
event peer
address
Enter the keyword
event
then the peer address in a dotted
decimal format (A.B.C.D.).
packet peer
address
Enter the keyword
packet
then the peer address in a dotted
decimal format (A.B.C.D.).
pim Enter the keyword
pim
to debug advertisement from PIM.
Defaults Not configured.
Command Modes EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Multicast Source Discovery Protocol (MSDP) 1405