Dell C9000 series, Reference Manual

Page: 1321 / 2286

Parameters
linecard slot-id (REQUIRED) Enter the keyword
linecard
then a slot number to
select the linecard for which to gather information. The range of
C9000 slot IDs are from 0 to 11.
port-set port-pipe (REQUIRED) Enter the keywords
port-set
then a port-pipe
number to specify the port pipe for which to gather information.
The range of port pipe numbers is from 0 to 0.
address mac-addr (OPTIONAL) Enter the keyword
address
then a MAC address in
the nn:nn:nn:nn:nn:nn format to display information on that
MAC address.
dynamic (OPTIONAL) Enter the keyword
dynamic
to display only those
MAC addresses the switch dynamically learns.
interface interface (OPTIONAL) Enter the keyword
interface
then the interface
type, slot and port information:
• For a Port Channel interface, enter the keywords
port-
channel
then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
then the slot/port information.
static (OPTIONAL) Enter the keyword
static
to display only those
MAC addresses specifically configured on the switch.
vlan vlan-id (OPTIONAL) Enter the keyword
vlan
then the VLAN ID to
display the MAC address assigned to the VLAN. The range is 1 to
4094.
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.3.7.0 Introduced on the S4810.
7.5.1.0 Introduced on the C-Series.
Layer 2 1321