background image

TM

 1

FrameSaver

 SLV

Network Access Module (NAM) 
Installation Instructions

Document Number 9000-A2-GN1J-30

May 1999

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste of
surplus printing. It also helps us maintain competitive prices for our products.

Complete documentation for this product is available at www.paradyne.com.
Select 

Library 

Technical Manuals 

FrameSaver Frame Relay Devices.

Select the following document:

9128-A2-GB20
FrameSaver SLV 9126/9128 User’s Guide

To request a paper copy of a Paradyne document:

Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)

Outside the U.S.A., call 1-727-530-8623

Before You Begin

Make sure you have:

A small, flat-blade screwdriver.

A small, Phillips screwdriver if installing an ISDN PRI DBM.

FrameSaver SLV ISDN Dial Backup Module (DBM) Installation Instructions
(Document No. 9000-A2-GN19) if installing an ISDN PRI DBM.

If a FrameSaver NAM with DBM is being replaced, the DBM must be transferred to
the replacement NAM.

Configuration information for the FrameSaver unit being installed or replaced.

Summary of Contents for SLV





























Reviews: