8
Configuring the FrameSaver Unit
To configure the FrameSaver unit:
Set the system clock.
Assign the Node IP Address.
Set up Network physical interface, and DSX-1 physical interface, if applicable.
Enter time slot assignments, if applicable.
Set up Data Port physical interface(s).
Set up modem call directories if dial-out traps are desired.
Set up management.
Set up Automatic Frame Relay Discovery Configuration.
Set up Automatic Backup Configuration, if an ISDN DBM if installed.
Setting the System Clock
To set up the system clock:
1. Select Date & Time.
Main Menu
→
Control
→
Date & Time
2. Move the cursor to the first field and enter the:
– Date in mm/dd/yyyy format (month/day/year).
– Time in hh:mm format (hours:minutes).
3. Save the date and time.
Assigning the Node IP Address
1. Set up the node.
Main Menu
→
Configuration
→
Management and Communication
→
IP Node
2. Minimally, enter the following options:
– Node IP Address
– Node Subnet Mask
3. Save the configuration.
