Dell C9000 series, Reference Manual

Page: 1590 / 2286

ipv6 ospf hello-interval
Specify the time interval between the hello packets sent on the interface.
C9000 Series
Syntax
ipv6 ospf hello—interval seconds
To return to the default time interval, enter
no ipv6 ospf hello—interval
.
Parameters
seconds
Enter the time interval in seconds as the time between hello
packets. The range is from 1 to 65525 seconds.
Defaults 10 seconds (Ethernet).
Command Modes INTERFACE
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
7.8.1.0 Added support for the C-Series.
7.4.1.0 Introduced on the E-Series.
8.3.19.0 Introduced on the S4820T.
Usage Information The time interval between hello packets must be the same for routers in a network.
Related
Commands
ipv6 ospf dead-interval – specifies the time interval between hello packets was
received from a router.
Open Shortest Path First (OSPFv2 and OSPFv3) 1590