Dell C9000 series, Reference Manual

Page: 1957 / 2286

If you configure the
key
parameter in the
radius-server host
command, the key
configured with the
radius-server key
command is the default key for all RADIUS
communications.
Related
Commands radius-server host — configures a RADIUS host.
radius-server retransmit
Configure the number of times the switch attempts to connect with the configured RADIUS host server
before declaring the RADIUS host server unreachable.
C9000 Series
Syntax
radius-server retransmit retries
To configure zero retransmit attempts, use the
no radius-server retransmit
command.
To return to the default setting, use the
radius-server retransmit 3
command.
Parameters
retries Enter a number of attempts that the system tries to locate a
RADIUS server. The range is from zero (0) to 100. The default is
3 retries .
Defaults 3 retries
Command Modes CONFIGURATION
Command History This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.0 Introduced on the E-Series.
Security 1957