Dell C9000 series, Reference Manual

Page: 1691 / 2286

The
show ip pim interface
command does not display information corresponding
to the loop-back interfaces.
Example
Dell#show ip pim interface
Address Interface Ver/ Nbr Query DR DR
Mode Count Intvl Prio
172.21.200.254 Te 0/9 v2/S 0 30 1 172.21.200.254
172.60.1.2 Te 0/11 v2/S 0 30 1 172.60.1.2
192.3.1.1 Te 0/16 v2/S 1 30 1 192.3.1.1
192.4.1.1 Te 1/5 v2/S 0 30 1 192.4.1.1
172.21.110.1 Te 1/6 v2/S 0 30 1 172.21.110.1
172.21.203.1 Te 1/7 v2/S 0 30 1 172.21.203.1
show ip pim neighbor
View PIM neighbors.
C9000 Series
Syntax
show ip pim neighbor
Command Modes
• EXEC
• EXEC Privilege
Command History This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide .
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the C9010.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Introduced on the S-Series.
Usage Information The following describes the
show ip pim neighbor
command shown in the
following example.
PIM-Sparse Mode (PIM-SM) 1691